Remotely viewing Raspberry Pi Cams

If you’ve mounted where your Raspberry Pi and camera in a place where you can’t plug in a screen and keyboard, you’ll want an easy way to see how its photos look. Try using a mobile app instead of manually transferring photos to another machine where you can view them.

Still photos on an Android device

RaspiCam Remote Android app logs into your Pi via SSH, runs raspistill, and sends the output to your Android device. You can use the GUI to preview some filters, or set command line arguments. I haven’t tried the video features yet.

There are some other apps for Android as well like Pi Sight and Raspberry PiCam.

Still photos with an iOS device

Consider BerryCam. I haven’t tried it, but it looks like RaspiCam Remote.

Fixing incorrect Raspberry Pi Cam auto exposure

Are your pictures coming out too bright or dark under reasonable lighting conditions? Check your timeout value (the -t parameters in raspistill -t 100 -o cam.jpg.

I took a bunch of pictures using raspistill -t 100 and didn’t understand why they were coming out over exposed on an average, sunny day. I tried different metering, exposure, and exposure compensation modes, but none of them consistently improved the image. I didn’t realize what was happening until I tried raspivid and watched the camera adjust itself for the first few seconds within turning on.

Under normal usage, raspistill turns on the camera and prepares it to take a picture. After 100ms, it hasn’t had enough time to adjust the exposure. I find it needs at least a 1000ms to get it close, and about 2000ms to settle the correct value. Increasing the timeout to 2000ms solved the issue for me. Delaying taking the photo by 2000ms was not an issue in my use case.

If you can’t wait for the timeout, look into Signal Mode, which would let you turn the camera on early, and then trigger taking a picture with another command. The time between those two commands maybe enough for the camera to adjust its exposure.